Ru En

About

Robots

Lasers

Download center — lasers

Chatbots

Contact

Endurance DIY Laser Engraving Machine (fully assembled and tested)

Advantage of Endurance DIY engraving/cutting machine

Can engrave and cut

Easy to operate

Can work from a battery

Does not require
additional cooling

Can engrave halftones (greyscale)

Give unique gifts, create, become a master of laser cutting/engraving

Our tool will be useful for both professional artists and amateurs who want to put the logo on their's prototype or decorate a favorite gadget. Lasers and engraving machines allow you to work with leather, wood, fabric, felt, plywood, acrylic and open up new possibilities for creation real masterpieces of art.

However, it should be noted that high temperatures cause most materials to blacken. An Endurance laser is powerful enough to cut acrylic, wood, plywood, cardboard and leather up to 3/16 "(4.76 mm) thick. (In some experiments, we even managed to cut wood and plywood up to 8.5mm thick with repeated passes of the laser beam.)

"

Always in stock Worldwide Shipping

Check prices

New upgraded 5.6W and 8W lasers pictures for DIY engraving machine

Endurance 8Watt (8000 mw) diode (solid-state) laser

Endurance 5.6Watt (5600 mw) diode (solid-state) laser

steel engraved with Endurance 5.6W - 8W diode laser

Imagine and Create Nice Pieces of Art

IMG_9974_1

Endurance DIY engraving machine supports 2.1 Watt / 3.5 Watt / 5.6 Watt / 8 Watt / 8.5 Watt/ 10 Watt diode lasers

Let us present Endurance DIY desktop diode laser engraving/cutting machine. This Endurance DIY engraving/cutting machine is equipped with a powerful blue diode laser with a wavelength of 445 nm and power of either 2100mW (2.1 Watt) [minimum] or 10000mW (10 Watt) [maximum]. The tool is very easy to use and operate. Just connect it to the computer and engrave or cut whatever you wish. The Endurance DIY engraver/cutter engraves and cuts various materials including PLA, ABS, wood, plywood, leather, acrylic. This DIY laser engraving/cutting machine will become useful at home or office.

All the necessary software is on the enclosed USB flash drive. You need to manually install the driver, restart your computer and copy the folder with the software program from the USB flash drive to your computer work folder.

Everything is very easy!

General

Color Silver + Transparent
Material Stainless steel + Acrylic
Dimensions & Weight
Dimensions 12.2 in x 9.84 in x 5.91 in (31 cm x 25 cm x 15 cm)
Weight 74.07 oz (2100 g)

Package list

1 x 2100mW / 3500mW / 5600mW / 8000mW /8500mW / 10000mW Endurance diode Laser Engraving Machine
1 x Power adapter (about 135 cm)
1 x Power cord (about 131cm)
1 x USB flash drive (1GB with Driver Software / Design Software/Sample)

You can cut and engrave almost on any surface*.

Laser cutting:	Laser engraving:
Acrylic (depends on a laser power output)	Acrylic
Leather	Leather
Fabric	Fabric
Felt	Felt
Hardboard	Hardboard
Cardboard	Cardboard
Wood (depends on a laser power output)	Wood
Plywood (depends on a laser power output)	Plywood
Paper	Paper
.	Aluminum (depends on a laser power output)
.	Create your own PCB
.	Glass (depends on a laser power output)

You may choose and have a stepper motor to control Z axis

Software to operate DIY engraving machine:

http://grbl-controller.software.informer.com/download/

http://grbl-controller.software.informer.com/3.6/

http://zapmaker.org/projects/grbl-controller-3-0/grbl-controller-downloads/

Warning: Remember DO NOT look at the laser light without protective glasses as it might cause serious harm to health. The new laser is more powerful and effective than the previous! Users must wear safety goggles!

Tech features of Endurance DIY engraving / cutting machine

Parameters	Value
Power output	2.1W (2100 mW), 3.5W (3500 mW), 5.6W (5600 mW), 8W (8000 mW), 8.5W (8500 mW), 10W (10000 mW)
Maximum engraving speed	0.8 - 2 inch / sec
Maximum cutting speed (0.04 inch of a cardboard)	0.1 - 0.25 inch / sec
Maximum cutting depth (plywood)	0.1 - 0.3 inch
Maximum cutting depth (acrylic)	0.1 - 0.2 inch
The maximum height of the workpiece	not more than 2 inch
Maximum cutting / engraving area	8 X 8 inch
The accuracy of engraving (grain)	0.004 inch
Compatible software	GRBL, AS
Lifetime	More than 1000 hours
Operating conditions	-20 C - +40 C
Cooling	air
Power input	110 / 220 Volts
Average energy consumption	~ 30W
Dimensions (W x D x H)	10 X 14 X 8 inch
The weight	~ 9 pounds
Mount	Does not require
Focal length	1 - 4 inch
Features	Can work with gcode and raster images. Actuator can be installed to control Z axis
Limitations	Can not cut transparent, ceramic and metalic things
Average delivery pricing	~ 40-60 USD world wide shipping