Endurance Makeblock XY 2.0 laser engraving and cutting machine (plotter)

General features:

Aluminum extrusion parts.
Two metal stepper motors with a back shaft.
A 12V solenoid included.
Closed type bushing block and ball bushing insert for use in linear motion applications.
Four-bolt aluminum alloy bushing block for a lightweight ready-to-mount installation.
Synthetic resin retainer plate for accurate ball guidance and low noise.
Four rows of recirculating balls inside the ball bushing for smooth running.
Integral lip seals to retain lubricant and protect against contamination.
Round steel shaft for use with slide units in linear motion applications.
Chrome plated for corrosion resistance.
Case hardened for wear resistance.
Precision ground for consistent ball bushing radial clearance.

Software:

Controlled by mDraw or Benbox, Laser Engraver Upgrade Pack is able to engrave awesome patterns and words on phone cases, wallets, jeans, wooden boards, paper boards, Acrylic plates, etc, hence customizing your own special items.

Full instruction - XY Plotter V2.0 User Guide DownLoad Pack

Tech features

Parameters	Value
Power output	2.1W (2100 mW) / 3.5W (3500 mW) / 5.6W (5600 mW) / 8W (8000 mW) / 8.5W (8500 mW) / 10W (10000 mW)
Maximum engraving speed	0.8 - 2 inch / sec
Maximum cutting speed (0.04 inch of a cardboard)	0.1 - 0.25 inch / sec
Maximum cutting depth (plywood)	0.1 - 0.3 inch
Maximum cutting depth (acrylic)	0.1 - 0.2 inch
The maximum height of the workpiece	not more than 2 inch
Maximum cutting / engraving area	12 X 15 inch
The accuracy of engraving (grain)	0.004 inch
Compatible software	Benbox
Lifetime	More than 10000 hours
Operating conditions	-20 C - +40 C
Cooling	air
Power input	110 / 220 Volts
Average energy consumption	~30W
Dimensions (W x D x H)	25 X 25 X 6 inch
The weight	~ 9 pounds
Mount	Does not require
Focal length	1 - 4 inch
Features	Can work with gcode and raster and vector images.
Limitations	Can not cut transparent, ceramic and metalic things
Average delivery pricing	~ 40-70 USD world wide shipping

Endurance Makeblock laser engraving / cutting machine

You May Cut and Engrave Using Endurance powerful Lasers	About Endurance Lasers
The Laser Engraver machine uses a beam of light to cut and engrave various materials: wood, acrylic, PLA, ABS, felt, fabric, paper, cardboard, hardboard.	A blue-violet diode laser with the wavelength of 445nm. Has a PWM controller (greyscale availability) Highly efficient (does not require additional cooling) Endurable (can work for 48-72 hours without stop) Made in the USA (tested in Russia).